Carbonated Beverage Combiblock
Carbonated Beverage Combiblock is a reliable and innovative packaging solution that offers a wide range of benefits for both consumers and producers. Its ability to preserve the freshness and flavor of carbonated beverages, portability, and environmental sustainability make it a popular choice in the market today.
- Fast Delievery
- Quality Assurance
- 24/7 Customer Service
One of the most prominent features of carbonated beverage combiblock is its ability to preserve the freshness and flavor of carbonated drinks. It is designed to protect the contents from external elements that can affect its quality, such as light, moisture, and air. This ensures that the beverage tastes just as good as when it was first bottled.The material used in is also durable and resistant to breakage, preventing spills and other accidents.
Bottle filling machine is a fully automatic multifunctional combined unit consisting washing, filling and capping. The bottle filling machine is the step of put materials into containers and seal it. It's very important and sensitive for quality control. The filling machine capacity in our industry normally start from 2,000BPH up to 36,000BPH.
Bottle blow molding machine is used to make containers for product, PET preforms are heated by lamps and then blowed by high pressure clean air within mold. It will become a bottle container as you designed. The blow molding machine capacity normally from 1,000BPH to 20,000BPH
Bottle filling machine is a fully automatic multifunctional combined unit consisting washing, filling and capping. The bottle filling machine is the step of put materials into containers and seal it. It's very important and sensitive for quality control. The filling machine capacity in our industry normally start from 2,000BPH up to 36,000BPH.
There are different production, such as BOPP labeling, sleeve and shrink labeling and adhevise labeling etc. The capacity for labeling machine starts from 2,000BPH up to 20,000BPH, we can choose different but suitable ways for customers.
Bottle packing machine is the last step for production line usually. There are different ways for packing such as shrink packing, carton packing, half- tray wuth shrink packing etc. Bottle packaging machine speed usually from 10PPM up to 80PPM, all confirgurations we used are world famous brand, to ensure the machine quality.
Equipment Structure
PREFORM FEEDING
HEATING OVEN
BLOWING STATION
BOTTLE OUT
Product Parameters
| Parameters of the molding machine | ||
| Embryo bucket volume m3 | TBD | |
| Maximum bottle speed BPH | 35000 | |
| Applicable bottle preform size mm | dia.25-dia.45 H<=190 | |
| Moter power(elevator + billet trimmer +...) kw | 2.2 | |
| Voltage/frequency/phase | 380V+/-10%/50Hz/three-phase five-wire | |
| Bottle blowing machine and heating machine | ||
| Components | Item | Parameters |
| Blow bottle part | Mold (cavity) quantity | 12 |
| Flask height (lower part of support ring) | 1.5m | |
| Heating part | Heating unit | 16 |
| Infrared tube layer | 9 | |
| Eectric parameter | Electrical voltage | 380V |
| Frequency | 50/60Hz | |
| Total installed power | Total power | 200 |
| Air source | The compressed air pressure | 3.5-4.0MPa |
| High pressure compressed air consumption | TBD | |
| Heating machine cooling water (water temperature <=20℃) | Presssure | 5-7bar |
| Flow | ||
| Power | ||
| Mold cooling water (water temperature 5-12℃)about mold | Pressure | 5-7bar |
| Flow | ||
| Power | ||
| Mold cooling water (water temperature 5-12℃) bottom mold | Pressure | 5-7bar |
| Flow | ||
| Power | ||
| Weight | Main engine/heating machine/electric control box etc | 15t |
| Equipment dimensions | Main machine(L×W×H)mm | 4200*3200*3650 |
| Heating machine(L×W×H)mm | 5480*1700*2210 | |
| Billet sorting machine(L×W×H)mm | 7020*5220*4500 | |
| Preform size | Preform height | ≤150mm |
| Inside diameter of preform | Φ14mm-Φ26mm | |
| The diameter of the supporting ring | Φ26mm-Φ40mm | |
| Bottle size | The diameter of the round bottle | Φ50mm-Φ116mm |
| Bottle size (diagonal) | 50mm-116mm | |
| Height below the supporting ring | ≤300mm | |
| Capacity range | 0.2L-2.5L | |
| Preform material | PET | |
BLOWING FILLING CAPPING
Product Application
on the basis of the previous filling machine and is directly connected to the blowing machine to avoid bottle wear caused by the
empty bottle conveying phenomenon, reduce the weight of the bottle and save costs. The equipment is suited for carbonated drinks
plants, such as the Cola plant, Sprite plant, and Sparkling Drinks plant, ...
This carbonated beverage filling plant consists of an empty bottle blowing part, filling part, capping part, and electrical controlling system.
Its standard capacity is 36000BPH for 600ml PET Bottle Screw Cap. (BPH - Bottles Per Hour)
This special advantage is with smaller workshop space, higher efficiency production, fewer operators, lower energy consumption, and more reliable quality assurance.
Cooperation brand
WAHAHA
XIWANG
DAO DAO QUAN
CHIVALRY
JINMAILANG
NONGFU SPRING
We have more related products, welcome to buy
Since its establishment, the company has always been committed to the field of PET packaging
Hot Tags: Carbonated Beverage Combiblock, China Carbonated Beverage Combiblock Manufacturers, Suppliers, Factory, Semi Automatic Bottle Blowing Machine, Pet Bottle Making Machine, Water Bottling Machine
Hot Tags: carbonated beverage combiblock, China carbonated beverage combiblock manufacturers, suppliers, factory, Carbonated Combiblock, Aerated Water Combiblock
